±100A AC/DC 200kHz Dual Channel Current Probe
analogSENS i2 (ANi2-A1)
Applications
✓ Power Electronics Measurements
✓ Motor Current Monitoring
✓ 3 Phase Current Measurement
Features
✓ Oscilloscope Current Probe
✓ High Bandwidth (DC – 200 kHz)
✓ High Accuracy of 0.7%
✓ Compatible with all Oscilloscopes
✓ Lowest Cost High Quality Probe
Certification & Warranty
✓ CE & FCC Certified
✓ 1 Year Standard Warranty
Specifications
| Parameter | Value | Unit | Parameter | Value | Unit |
|---|---|---|---|---|---|
| Channels | 2 | – | Range | ±100 | A |
| Bandwidth | DC-200 | kHz | Sensitivity | 0.1 | V/A |
| Accuracy (BNC) | <0.7 | % | Offset | ±14 | mV |
| Rise Time (BNC) | <2 | us | System Voltage (OV CAT III) | 600 | V |
| Opening Dimensions | 12.7 x 8.5 | mm | System Voltage (OV CAT III) | 1000 | V |
| Supply Voltage | 5 | V | Supply Current | 1.5 | A |
Banana Connector to Wire Adapter (TBAN)
Handy Tool For Easy Wiring
Our probe is not a clamp one, so we created a handy accessory for the lab taking safety into consideration. You can use standard banana plugs with our current probe seamlessly using the TBAN which allows disconnection between the probe and the experimental setup easily. It can also be used to increase sensitivity using multiple turns on the probe (sensitivity = 0.1 x No. of turns) to measure much smaller currents at high accuracy. Each probe includes two TBAN adapters.
2 Channels for 3 Phase Measurements
3 Phase Motor Applications Require 2 Phase Measurements Only
For three phase motor applications, only two phases are measured. The third phase is calculated from the relation that sum of all phases is zero since its a 3 wire system, and kirchhoff low can be applied. Because of that, single probe with dual channel measurements is enough for motor applications. intelliSENS software also generates the third phase with a dedicated button, which saves you time and effort.
